About

All telecom fundamentals on SIP protocol, VOIP, RTP, RTCP knowledge, Technical Youtube Videos, Linux material, Android, SSCA certification information,the sip school videos.

Saturday, 13 October 2012

How to flash CyanogenMax JB for the Galaxy Tab 2 10.1

How to flash CyanogenMax JB for the Galaxy





CyanogenMod 10 is one of the most installed custom ROMs out there. It boasts a lot of great features and sports Android 4.1 Jelly Bean’s iconic smooth UI design. Installing it on a tablet, specifically the Samsung Galaxy Tab 2 10.1, gives it a bit more boost in power, but what if it still isn’t fast enough for you? That’s what the CyanogenMax JB custom ROM was built for.
The Samsung Galaxy Tab 2 10.1 has received a heavily modded CyanogenMod 10 build compiled by XDA Developers member maxio1998. CyanogenMax was created for the purpose of providing a faster and smoother experience achieved through tweaks to its user interface responsiveness, the deletion of redundant or underused apps, removed ringtones, a new init.d script, adjusted space for the /system/app and /system/media, and much more.
This guide shows you how to flash CyanogenMax JB for the Galaxy Tab 2 10.1.

Warning

  • The instructions in this guide are intended for use with the Samsung Galaxy Tab 2 10.1. Applying these instructions on another device or model may produce undesired outcomes.
  • The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
  • Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
  • Read and understand the whole guide first before actually performing the instructions.

Requirements

  • Samsung Galaxy Tab 2 10.1 with ClockworkMod Touch Recovery
  • Download the following files:
    • CyanogenMax JB ROM file for the Galaxy Tab 2 10.1 (CyanogenMax_JB_Build1_by_maxio1998.zip, md5: 682cfdbed554ee9dc5430e13a4e0b14a)
    • Google Apps package for the Galaxy Tab 2 10.1 (gapps-jb-20120726-signed.zip, md5: f62cfe4a827202899919fd932d5246d7)
  • Make sure your device’s battery still has at least 70% power. You don’t want the device to shut down in the middle of the procedure.
  • Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.

Instructions

  1. Copy the ROM package and Google Apps package to your phone’s internal SD card.
  2. Turn off the tablet.
  3. Boot into ClockworkMod Touch Recovery. To do so, push and hold down the Power and Volume Down buttons at the same time. The Samsung Galaxy Tab 2 10.1 logo will show up and then you can release the power button but continue holding the Volume Down button for a few more seconds.
  4. Create a NANDroid backup of your existing ROM. To do so, select Backup and Restore. On the next screen, select Backup again.
  5. Go back to main recovery menu after backup is complete.
  6. Select Wipe data/Factory reset and confirm the action on the next screen.
  7. Select Advanced and then select Wipe Dalvik cache. Confirm the action on the next screen.
  8. Select Wipe cache partition. Confirm the action on the next screen.
  9. Select Install ZIP from SD card > Choose ZIP from SD card.  Select the ROM’s ZIP file and confirm that you want to install it.
  10. Repeat step 9 and install the Google Apps package in the same manner.
  11. Select Reboot system now to restart your phone into the new ROM.
Congratulations! You’ve just installed CyanogenMax JB on your Samsung Galaxy Tab 2 10.1

 

Reactions:

0 comments:

Post a Comment

Note: only a member of this blog may post a comment.

Page Navigation Widget